8kW Split-Phase V2L Inverter for US-Market Tesla
Use energy from a compatible US-market Tesla to power compatible appliances and equipment. This vehicle-to-load system delivers 120/240V split-phase AC output at 60Hz, with up to 8kW total power and up to 4kW per leg.
Flexible AC Outputs
The standard configuration includes four 120V US-style outlets, each rated up to 20A, plus one NEMA 14-50R receptacle providing access to 120/240V output. Custom outlet configurations are available on request.
All outlets share the system’s power capacity. Individual outlet ratings do not increase the inverter’s total or per-leg output limits.
Bluetooth Monitoring and Control
Connect through the CyberPower Link app to monitor both output legs and manage your discharge session. A compatible app screen displays:
L1–N, L2–N and L1–L2 voltages
Current and power for each leg
Total output power
Vehicle and internal battery levels
Fault information and diagnostic data
Use the app to switch output on or off and set the discharge cutoff state of charge (SOC), retaining battery charge for subsequent driving.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Vehicle-to-load inverter |
| Vehicle compatibility | Compatible US-market Tesla vehicles; confirm specific model before ordering |
| AC output system | Single-phase, three-wire split-phase: L1, N and L2, with separate PE |
| L1–N output voltage | 120V AC |
| L2–N output voltage | 120V AC |
| L1–L2 output voltage | 240V AC |
| Output frequency | 60Hz |
| Maximum total output | Up to 8kW |
| Maximum output per leg | Up to 4kW |
| Standard 120V outlets | 4 × US-style outlets, up to 20A per outlet |
| Combined-voltage receptacle | 1 × NEMA 14-50R, 50A-rated receptacle; output remains subject to inverter limits |
| Outlet customization | Available on request |
| Vehicle DC input | 100–480V DC, subject to confirmed vehicle compatibility |
| Connectivity | Bluetooth via CyberPower Link |
| Warranty | 12-month limited warranty, subject to supplied terms |
Protection and Load Management
The system monitors conditions including short circuits, overloads, abnormal voltage or temperature, vehicle stop requests and the selected SOC cutoff.
Distribute appliances between L1 and L2, start loads individually and allow headroom for motor or compressor starting surges. Keep each leg within 4kW and total output within 8kW. Lower nameplate, outlet or cable ratings take priority.
Compatibility and Use
Confirm your specific vehicle model, connector and required outlet configuration before purchase. A matching vehicle connector alone does not establish compatibility.
Use the unit as a standalone appliance power supply. Never connect its output to a utility wall outlet, backfeed household wiring or operate it in parallel with another power source. Keep the unit dry and ventilation openings clear. Read the user manual before use.
